Waste Incinerator Dioxin Control and Emission Standards｜第 2 條｜大氣環境｜Regulation｜In Force
環境部｜v1.0
Last Amended: 2003-08-20
Terms and symbols used in these Standards are defined as follows: -9 I."ng" means nanogram, equivalent to 10 grams. II."Nm3 ” means a cubic meter at a temperature of 273 K and a pressure of 1 atmosphere. III."ppm" means parts per million. IV."C" means pollutant concentration corrected to Standard Oxygen Basis, measured in ng-TEQ/Nm3 . V."Q" means emission quantity corrected to Basic Oxygen Standard, measured in Nm3/min. VI.“Cs” means measured pollutant concentration based on test method, not corrected to Standard Oxygen Basis, measured in ng-TEQ/Nm3. VII.“Os” means the actual measured oxygen concentration in emissions. VIII.“E, means the actual oxygen concentration of oxygen-enriched gases imported into incinerator. IX.“I-TEF" means the International Toxicity Equivalency Factor used internationally to calculate the toxicity weighting of dioxin concentrations. X.“TEQ" (Toxicity Equivalency Quantity of 2,3,7,8-tetrachlorinated dibenzo-p-dioxin) means the method for calculating the toxicity weighting of dioxin concentrations. XI.“Continuous incineration facility" means a facility that is continuously operating 24 hours per day. XII.“Gas retention time" means the time gas is retained in the second combustion chamber (complete combustion). XIII.“Variable one-hour average" means the average of continuously fluctuating values during a single hour.