Compliance Approval Regulations on Controlled Telecommunications Radio-Frequency Devices｜第 7 條｜通訊｜Regulation｜In Force
第 二 章｜國家通訊傳播委員會｜v1.0
Last Amended: 2017-06-07
Examination report mentioned in the Act shall be issued by the examination body. Where the examination body as described in the preceding paragraph is unable to provide the device examination service, the Applicant of compliance approval may submit examination reports issued by examination body accredited by accreditation bodies of other countries and the said report shall comply with Article 4. Where the testing laboratory accredited by accreditation bodies of other countries as described in the preceding paragraph is unable to provide the device examination services, the applicant may submit test reports provided by the manufacturer and the said report shall comply with Article 4. The examination report as described in Paragraph 1 shall include the following items: 1. Name and address of Applicant; 2. Name and address of examination body; 3. Report number that is used as the only identification. The number shall be printed on each page of the report. 4. Device name, brand name and model number; 5. Color photos or pictures of the sample device (of six sides of the sample and its accessories). The photos or pictures shall be minimum 4” x 6” and shall clearly show the brand name, model number and PCB components; 6. Interface test diagram and description. Where the test requires specific fixture and testing point, the Applicant shall specify the name of the said fixture, testing point and test software; 7. Name of testing instrumentation, brand name, model number, calibration date and date of expiry; 8. Examination items and standards as specified in relevant technical specifications; 9. Test data (including scanned picture) and verdict of test results; 10. Date of acceptance and completion of test. The test report as described in Paragraph 2 and 3 shall include the following items: 1. Name and address of Applicant; 2. Name and accreditation number of accreditation body, except for test report issued by the manufacturer; 3. Name and address of testing laboratories; 4. Report number that is used as the only identification. The number shall be printed on each page of the report;. 5. Device name, brand name and model number; 6. Color photos or pictures of the device sample (of six sides of the sample; its accessories; and the front and back of the radio-frequency component). The photos or pictures shall be minimum 4” x 6” and shall clearly show the brand name, model number and PCB components; 7. Interface test diagram and description. Where the test requires specific fixture and testing point, the Applicant shall specify the name of the said fixture, testing point and test software; 8. Test instrument’s name, brand name, model number, calibration date and date of expiry; 9. Examination items and standards as specified in relevant technical specifications; 10. Test data (including scanned picture) and verdict of test results; 11. Date of acceptance and completion of test. Related personnel of the examination body shall sign the examination report, whereas the test report shall be signed by the testing laboratory or personnel of the manufacturer.