85015110004 Explosion proof AC motors, multi-phase, of an output exceeding 37.5 W but not exceeding 750 W

Explosion: Explosion proof multi-phase motors (37.5W-750W)

防爆型多相交流電動機，輸出超過３７．５瓦，但未超過７５０瓦者

Tariff Rates

Column 1 (WTO members, incl. mainland China): 10%
Column 2 (FTA / ECFA / specific developing countries): 0% (PA,GT,NI,SV,HN,NZ,SG)
Column 3 (when Columns 1–2 do not apply): 10%

Import / Export Regulations

Export Regulations (Mainland China)

禁止進出境物品表（海關總署令第 43 號）：禁止出境：①列入禁止進境範圍之所有物品 ②涉及國家秘密之手稿、印刷品、影音與電腦儲存介質 ③珍貴文物及其他禁止出境之文物 ④瀕危的和珍貴的動物、植物（均含標本）及其種子和繁殖材料。連帶禁止之禁止進境 7 類含各種武器、仿真武器、彈藥及爆炸物品、偽造貨幣及有價證券、烈性毒藥、鴉片嗎啡海洛因大麻等麻醉品與精神藥物。（中國海關總署）
限制出境物品表（海關總署令第 43 號）：限制出境 7 項：①金銀等貴重金屬及其製品 ②國家貨幣 ③外幣及其有價證券 ④無線電收發信機、通信保密機 ⑤貴重中藥材 ⑥一般文物 ⑦海關限制出境的其他物品。此為進出境「物品」管理提示，特別涉及旅客攜帶、行李與寄遞申報；不等於所有商業出口無線電設備都要 SRRC。SRRC 型號核准適用於中國境內銷售、使用，商業出口是否須許可仍按兩用物項技術描述、用途與最終使用者判定。（中國海關總署）
禁止寄遞物品指導目錄（國郵發〔2016〕107 號）：19 類 188 種禁寄物品，集運高風險者：第 4 類壓縮和液化氣體（含打火機）、第 5 類易燃液體（含酒精成分香水、指甲油、油漆）、第 12 類毒品及易製毒化學品、第 16 類侵犯智慧財產權和假冒偽劣物品（盜版品、假藥）、第 17 類瀕危野生動植物及其製品（象牙、虎骨）。另《快遞暫行條例》（國務院令第 806 號，2025-06-01 施行）要求實名收寄、收寄驗視與安全檢查。（國家郵政局 / 公安部 / 國家安全部）
個人郵遞物品出境限值（寄台灣 800 元人民幣）：海關總署公告 2010 年第 43 號（經 2024 年第 176 號修改）：個人寄往港、澳、台地區之物品每次限值 800 元人民幣，寄往其他國家和地區為 1000 元人民幣。⚠️ 800 元是門檻不是免稅額度——超出者「應辦理退運手續或者按照貨物規定辦理通關手續」，不是只就超出部分課稅；僅郵包內單一不可分割物品經海關審核確屬自用者例外。另《海關法》第 46 條規定個人郵寄進出境物品應以「自用、合理數量」為限，超出者一律按貨物辦理。（中國海關總署）
一般出口程序：一般貨物出口須辦理出口報關（商品編號 10 碼）。集運包裹主流走跨境電商 9610「清單核放、匯總申報」（經營主體須為企業），次之為快件貨物類（KJ2 報關單）或郵政 EMS／國際小包。未列於上方管制者，通常正常申報即可。（中國海關總署）

This column maps China's export control categories by the first 6 digits of the HS code and is for reference only. China's customs commodity codes have 10 digits, and from the 7th digit onward they do not correspond to Taiwan's tariff numbers. China also states officially that “the scope of goods is determined by the goods description; customs commodity codes are provided as a reference for customs declaration”, and for dual-use items that “a licence must be obtained as required by law whether or not a customs commodity code is listed”, so whether goods may be exported cannot be judged by the code alone. Some control measures are currently suspended; actual export rules are subject to China's latest official announcements.

Export Regulations (Japan)

関税法第69條之2（禁止出口）：毒品、兒童色情、侵害智慧財產權物品（仿冒/盜版）、不正競爭物品等一律禁止出口。（日本海關）
輸出貿易管理令別表第1（清單規制／該非判定）（partial）：半導體、通訊/電腦/感測器等部分規格品屬安全保障管制；須做該非判定,符合者需經濟產業大臣許可。（經濟產業省）
一般出口程序（関税法）：一般貨物須辦理輸出申告並取得輸出許可；出口適用消費稅免稅（0%）。未列於上方管制者,通常正常申告即可。（日本海關（NACCS））

This panel maps Japan export-control categories by the first 6 digits of the HS code, for reference only; dual-use goods require a classification (gaihi) determination by METI. Follow official Japanese announcements for actual rules.

Import Regulations (Taiwan)

375 1. Importation of the required or regulated machinery, equipment and tools by the Ministry of Labor (MOL) (hereinafter referred to as "The regulated Goods") must be handled according to the following regulations: (1) A copy of the registration document for the regulated Goods issued by the MOL or the Conformity of Certificate (COC) of Type-Certification issued by the designated Type-Certification Bodies (TCBs) should be obtained, and; (2) the number of the registration document or the COC (all consisting of 14 letters and digits) must be declared and listed in the import declaration. In case of importation of the regulated Goods without the registration document or the Conformity of Certificate (COC) of Type-Certification, the Application for Prior Release for the importation of the regulated Goods may be submitted to MOL. The specified number for Prior Release for the importation of the regulated Goods (14 letters and digits) must be declared and listed in the import declaration. 2. For the importation of the regulated Goods which meet any one of following conditions, these have been registered and uploaded the Approval document by the MOL or the Authority on the specified website, and the specified code should be listed on the import declaration are exempted from the above regulations of item 1 :(1) regulated Goods are subject to requirements for inspection, certification, approval or management in accordance with other laws or acts, (2) Importation of Goods for military or national defense use, sole purpose of technological research and development, experimental study, exhibition or testing use, an approval issued by the Authority. (3) Certain Goods to be imported will be exported after further processing or assembling.3. Importing Goods are exemption from the scope for the above regulations of item 1, the specialized code ML999999999989 should be listed on the import application for these Goods.
- Occupational Safety and Health Act ：Applicable Provision Art. 7 — (Ⅰ)Machinery, equipment, or tools specified by the Central Competent Authority whose structures, functions, or safeguards do not fulfill safety standards shall not be manufactured and shipped from the… Penalty for Violation Art. 44 — (Ⅰ)Failure to register in accordance with the provisions of Paragraph 3, Article 7 or violations of the provisions of Paragraph 2, Article 9 or Paragraph 2, Article 10 shall be subject to a fine of no…
- Safety Standard of Machinery, Equipment and Tools ：Applicable Provision Art. 120 — When the specially constructed machinery or equipment that is difficulty in the application of this standard, the manufacture or importer shall submit product safety evaluation report and other relate…
- 機械器具型式檢定實施辦法：Applicable Provision Art. 11 — 機械器具之製造商或進口商向檢定機構申請型式檢定時，應檢附下列文件：一、機械器具基本資料。二、歸類為同一型式之理由說明書。三、主型式及系列型式清單。四、構造圖。五、電氣回路圖。六、性能說明書。七、操作說明書。檢定機構認有必要時，得要求前項申請人另提供相關試驗報告、文件或物件。檢定機構為辦理前二項資料之保存及管理，得要求申請人提供相關資料之電子檔。

Legal information is for reference only; actual import/export rules are governed by customs announcements.

Main Import Source Countries（ROC Year 114）

United States 14.26 tonnes 63.33%
Brazil 4.81 tonnes 21.34%
United Kingdom 2.76 tonnes 12.27%
Germany 0.37 tonnes 1.63%
Italy 0.32 tonnes 1.43%