Regulations Governing the Use of Commodity Inspection Mark｜第 3 條｜標準檢驗｜Regulation｜In Force
經濟部｜v1.0
Last Amended: 2026-01-21
The Mark is comprised of a graphic symbol with an identification number. Unless otherwise specified, the identification number shall be placed to the right of or below the graphic symbol. The graphic symbol for the Mark, named Product Safety Mark, is illustrated in Appendix 1. The identification number of the Mark shall, depending on the inspection method, consist of a Roman letter, a sequence of numbers and/or designated codes as specified below: 1. For batch-by-batch inspection and monitoring inspection: the Roman letter 'C' followed by a number sequence, except the following situations: (1) Type-approved products designated by the BSMI permitting the applicant to print the Mark: the Roman letter 'T' followed by a designated code; (2) Commodities manufactured by organizations with management systems certified by the BSMI permitting the applicant to print the Mark: the Roman letter 'Q' with a designated code; and (3) Commodities designated by the BSMI permitting the applicant to print the Mark: a Roman letter 'M' with a designated code. 2. Registration of product certification: the Roman letter 'R' followed by a designated code. For products designated by the BSMI, the identification number shall consist of the Roman letter “R”, a sequence of numbers and a designated code. 3. Declaration of conformity: the Roman letter 'D' followed by a designated code. The designated codes referred to in subparagraphs 1 and 2 of the preceding paragraph shall be specified by the BSMI when granting approval or issuing certificates. For the sequence of numbers mentioned in the proviso subparagraph 2 of the preceding paragraph and the designated codes mentioned in subparagraph 3 of the preceding paragraph, the applicant shall apply to the BSMI with the relevant documents. Where the designated codes referred to in the preceding paragraph are required, as designated and publicly announced by the BSMI, to include a QR code, an application for the QR code shall be filed with the BSMI before a certificate is issued or at the time of registration of declaration of conformity. For those which have been granted product registration certificates prior to the entry into force of the announcement of products to bear QR code, the application for QR code shall be made before the products are imported or transported out of the manufacturing premises.